The video above shows where I took the rig in 2014. Bahia Rincon, Samana peninsula, Dominican Republic. You can also see my power supply.
Here is an article on the first DSB rig that I built, out in the Azores:
https://www.gadgeteer.us/17METER.HTM
Serving the worldwide community of radio-electronic homebrewers. Providing blog support to the SolderSmoke podcast: http://soldersmoke.com
Solar X-rays: Geomagnetic Field: |
The video above shows where I took the rig in 2014. Bahia Rincon, Samana peninsula, Dominican Republic. You can also see my power supply.
Here is an article on the first DSB rig that I built, out in the Azores:
https://www.gadgeteer.us/17METER.HTM
Check out Hans's site about the circumnavigators:
February 10, 2023
SolderSmoke Podcast #224 is available.
http://soldersmoke.com/soldersmoke243.mp3
Video here: (32) SolderSmoke Podcast 243 (video) Hi7/N2CQR, uBITX, Success with High School Receiver Project - YouTube
Pete N6QW had technical difficulties this morning. He insisted that the show must go on. Pete will be back for the next episode.
Travelogue:
Bill in the Dominican Republic for all of January.
HI7/N2CQR Eastern
tip of the island. uBITX and dipoles.
20, 17, 10. CW and
SSB. SSB was tough and I had reports of
RF getting into the signal.
Went to CW.
Worked VWS Mike KA4CDN, and Walter KA4KXX on 20CW.
Finally moved up to 10 CW. Lots of contacts. Even though uBITX very QRP
on ten.
I am modifying the uBITX now.
Copper tape shielding to keep RF out.
Low power out not
the fault of the IRF-510s. The problem
is the 2N3904s.
Will replace with 2N2222 in To-18 cans.
Dean KK4DAS putting KD8CEC software into Arduino. I gave up.
Who sent me this orphan uBITX?
SolderSmoke Shack South in final phase of construction.
SHAMELESS COMMERCE DIVISION:
Patreon!
Bezos Shopping!
DC Receiver Project
Local High School radio club.
Simple: Like
Herring Aid 5 and Wes’s original.
Farhan’s four
stages:
BP Filter, Diode Ring, PTO, AF amp.
Simple Colpitts PTO SURPRISINGLY STABLE.
Simple and easy.
No chips. No complicated circuits.
Guys have helped test out the design: Rick N3FJZ, Walter KA4KXX,
Daniel VE5DLD, Stephen
VK2BLQ and others.
First session last night: We demonstrated build of the PTOs.
They worked (thank God).
Open Circuits book.
Envelope Detection Controversy
Save the Antenna – Book “Losing the Nobel Prize” K1JT
MAILBAG
--Dean KK4DAS 10 meter DSB!
Tiny SA ULTRA! FB
--John AC2RL on Elmer W3PHL DSB guy
--AC3K reports inventor of Fender Stratocaster guitar was a
ham: W6DOE
--AF8E was doing POTA.
I worked him. He said my rig had presence. FB
--Alain F4IET FB DSB rig with mic in Cigar can!
--Daryl N0DP worked him on SSB. He is homebrewing
--Steve N8NM was in for repairs but is on the mend.
--Rick G6AKG working with sub-harmonic mixers and logic chips
--Paul HS0ZLQ Built DC receiver but looking for something
else to build. No DSB!
--Steve AB4I – Coherer, Jagadish Chandra Bose, and Marconi
--Eldon KC5U
Worked VK5QD right after me and mentioned SolderSmoke FB
--Todd K7TFC is building the DC RX.
--Tony G4WIF and Ian G3ROO using automotive relays for
antenna switching. FB.
--Dave WA1LBP Great to hear from my fellow Hambassador (Okinawa)
Older post comments:
--Scott VO1DR was also in CF Rockey’s class! (Blog comment)
--Aurora Aug 4, 1972: Twelve people shared memories. (Blog comment)
--Will WN1SLG Googled novice call and was led to
my Novice log.(Blog comment)
Walter KA4KXX in Orlando has been a prolific builder of rigs for many years, and has been a great friend of SolderSmoke: Here are some of the SolderSmoke podcasts and blog posts in which Walter's solder melting was mentioned: https://soldersmoke.blogspot.com/search?q=KA4KXX
As we approach the end of our current stay in the Dominican Republic, I could not miss out on the chance to work Walter with his homebrew rigs. Even though the space weather was stormy, and my dipole was droopy, we arranged to meet up on the high end of the 20 meter CW band this morning. See the results in the video above. A solid QSO with Walter. He says it is HB2HB, but truth be told I was on a uBITX that was built more by Farhan than by me. But this was a great contact. Walter started with a 50W rig, then switched to his 3 watt rig with a DC receiver. FB
Here is the e-mail I received from Walter after the QSO:
Dear Bill:
27 December 2022: My old friend Mike EI0CL:
http://soldersmoke.com/soldersmoke239.mp3
TRAVELOGUE:
James
Webb Space Telescope. Mars returning to
opposition in early December.
BILL'S BENCH
Hex Beam K4KIO - on roof – TV Rotor – 20-17-12 Lots of fun.
Working Japan regularly, Australia, South Africa on long path 17,000
miles. 52 countries SSB since July 11.
VFOs and Temp stabilization.
Dean KK4DAS found my ceramic resonator VFO for DC receiver drifty. He
was right. So I built a real LC Colpitts
VFO. Got me into temp stabilization. A new hobby!
An obsession. HT-37 and Ht-32
parts. Ovens? WU2D’s second VFO video. Understanding thermal drift and how to
address it. Split stator caps. Cut and
try.
Built a Polyakov DC Receiver. https://soldersmoke.blogspot.com/2010/03/polyakov-plus-dual-band-receiver-with.html Lauser Plus. Lauser = Imp or Young Rascal! DK2RS. He used a ceramic Resonator VXO at 3.58 MHz. Mine works great on 40 with VFO running 3.5 -- 3.65 MHz. See schematic below.
On 40 AM with DX-100 and MMMRX. DX-100 died.
12BY7 VFO buffer went bad. How
common is failure in this tube type? Nice QSO with Tim WA1HLR about the DX-100.
Got my Dominican license: HI7/N2CQR! SSSS on the way. Thanks to Radio Club Dominicano and INDOTEL.
Getting more active in the Vienna Wireless Society.
BOOK REVIEW:
"The
History of the Universe in 21 Stars” by Giles Sparrow. Written during the pandemic. Published by Welbeck, in London. https://www.amazon.com/History-Universe-21-Stars-imposters/dp/1787394654 Also:
From “Atoms to Amperes” by F.A. Wilson available for download. See blog.
SHAMELESS COMMERCE DIVISION:
Todd K7TFC getting ready to launch “Mostly DIY
RF.” I used his TIA boards in my 1712
rig. He will have boards like this and
much more. Stay tuned.
I need more viewers on YouTube. They want 4,000 hours IN A CALENDAR
YEAR! Please watch!
FARHAN’S NEW “DAYLIGHT AGAIN” RIG. Analog.
VFO. Comments, observations. We need to get him on the podcast. Maybe two shows: SDR and HDR.
PETE'S BENCH
Time very limited. But still sharing lots of tribal wisdom.
Wireless set with tubes!
Tool recommendation – Air compressor
Farhan VU2ESE – Speaking of big antennas “Whenever
I look at the huge construction cranes in Hyderabad, I always think how one
could make 160m, 4 element yagi using it as a boom..”
Todd K7TFC in Spain, spotting Log Periodics in Madrid.
Andreas DL1AJG: Can
Biologists fix Radios?
Janis AB2RA Wireless Girl.
Expert on Hammarlunds. And was my
first contact with the Tuna Tin 2. She too was HB!
Peter Parker VK3YE on Owen Duffy VK1OD
Lex PH2LB on homebrew radio
Would this really be homebrew? Mail from H-A-D article on FM receiver
F4IET a DSB rig from France
Ciprian got his ticket YO6DXE
Josh G3MOT sent us a good video about the Vanguard satellite
and IGY.
Dave Wilcox K8WPE bought Chuck Penson’s Heathkit book.
Rogier -- So many great articles and links from PA1ZZ
Bill AH6FC Aloha.
Retiring. Wants to build. Mahalo!
Grayson KJ7UM Working
on an Si5351. Gasp.
Mike KE0TPE viewing YouTube while monitoring 6 meters. He will have a lot of time to watch!
Chris KD4PBJ spotted Don KM4UDX from VWS FB
Mark WB8YMV building a superhet. Having trouble with 455 kc IF can filter.
Walter KA4KXX Great comment on the Daylight Again rig.
Ramakrishnan Now VU2JXN was VU3RDD. Found lost Kindle with SolderSmoke book on it. Building SDR rig from junk box. Trouble with the LM386.
Pete, Farhan and Tony: Shelves of Shame
SolderSmoke Podcast #238 is available: http://soldersmoke.com/soldersmoke238.mp3
TRAVELOGUE:
Cathartic decluttering: Bill preparing for future winter travel to Dominican Republic. Will build SolderSmoke Shack South. Dividing everything up: Rigs, parts, tools, supplies, antennas, test gear. Everything.
PETE'S BENCH:
Tony G4WIF suggested that I make this talk available as an audio recording. Good idea. Here it is:
http://soldersmoke.com/N2CQRHomebrewing.mp3